rino gps

Tags:  

 

Rino buttons diagram

 

 

 

 

 

 

 

 

 

  1. Press the POWER button. The Rino beeps and goes to the radio page.
  2. Be sure the radio is set to channel 7, code 7.
  3. Go outside and wait for the Rino to lock on to GPS satellites; you'll know this has happened when the display says '2d Accuracy' or '3d Accuracy'. The Rino will hunt for about 5 minutes; if it goes to 'poor GPS reception' a menu will pop up. Choose 'Restart Search' if this happens. Or just turn the radio off and then back on.
    Rino GPS locked on
  4. Press the CALL button. It is the little button above the large TALK button. If I am in range, this will let me know your radio is on and you are looking for me. It will also mark your radio on my GPS chart so I can find you. If I am in range, I will answer.
  5. If I am not in range, try again every 5 minutes for an hour; then start trying every 30 minutes on the hour and on the half hour between the hours of 6 AM and 10 PM. Example: 6 AM, 6:30 AM, 7 AM, and so on. If you need to conserve batteries, turn the radio off between tries.
  6. If you don't have a watch, there is a time display at the bottom of the main menu screen. Press the PAGE button repeatedly until the main menu appears.
  7.  If you go to sleep, leave the radio turned ON, and put it outside. I may still be able to find it by using the polling feature. Don't do this unless you have more batteries!

0 Comments  Show recent to old
Post a comment


 RSS of this page